|
|
|
|
|
|---|---|---|---|
Built-In Amp and High and Low Level InputsSystems with a built-in amplifier do not require the addition of an external amp. They already have the power to play louder. High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units. |
MOSFET and Class A/BMetal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output. Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency. |
Variable Low Pass Filter and Subsonic FilterVariable low-pass filter gives you control over the frequencies that pass through to the subwoofer. Subsonic filter restricts low-frequencies below the specified setting for better subwoofer protection and performance |
Subwoofer Level Control and Bass BoostA wired remote lets you easily control the subwoofer level for customized output and superior sound. Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it. |
|
|
|
|
|
|---|---|---|---|
Short ProtectionAutomatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short. |
Phase ControlPhase control lets you switch the speaker phase with the amp if your speakers or subwoofer are hooked up ‘out of phase’. |
Low ProfileLow-profile subwoofers are a great choice for space-constrained areas without compromising on power and performance. |
Variable Input ControlThe Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly. |
- 8 inch Woofer with Built-in Amplifier
- Class A/B, MOSFET Power Supply
- 240 Watts RMS Power or 2400 Watts PMPO
- High and Low Level Inputs
- Variable Low Pass Crossover, Bass Boost, Subsonic Filter, Phase Control
- Thermal, Overload and Short Protection Circuits
- Remote Subwoofer Control
Deep Bass Low Profile
Enjoy the rich sound of Bass in just about any vehicle with the Zoook Monster X1 Class A/B 8” inch Low Profile Amplified Subwoofer. With 240 Watts RMS or 2400 watts pmpo Max Power and MOSFET power supply and High and Low Level Inputs, this Amplified Subwoofer can be hooked up to just about any in-dash stereo. With a height of just 2.7 inch, it’s a perfect solution when space is an issue as it can easily fit under the seat of almost all vehicles.
Zoook Moto69 MonsterX1 240-Watts RMS or 2400 Watts PMPO Underseat 8-inch Car Subwoofer with Inbuilt Amplifier
Zoook Monster X1 is an all in one solution to give you great sounding bass in your vehicle without taking up a ton of space. This sub enclosure is around 2.7″ thick so that it can easily fit under your seat. The amplifier is built in, so installation and wiring is easy and clean.
We wanted to truly make installation a breeze so we designed this unit with the user in mind from start to finish. We added high level inputs so you don’t need a remote wire from your receiver to trigger the unit on and off. The smart circuit will sense that an audio signal is present and turn on your radio and a signal is present.
Reviews
There are no reviews yet.